How to clean the shower screens.

Cleaning shower screens may seem like a complicated and exhausting task at first. However, it must be said that by following a series of guidelines, you can achieve having the screens clean and with very little effort. In the following article, we are going to give you a series of tips to help you perfectly clean the shower screens and make them look impeccable and free of dirt.

What you’ll need to clean the screens

Before starting to clean the screens, it is advisable to be clear about the materials you will need to leave them sparkling. You will need a special cleaner for screens, white vinegar, baking soda, a microfiber cloth, a soft sponge, glass cleaner, and hot water.

Don’t forget to wear rubber gloves to avoid your hands suffering from the cleaning products. A glass scraper can be quite useful when removing the most difficult and stubborn stains. It is also advisable to ventilate the bathroom well while cleaning to prevent the accumulation of fumes from the cleaning products. Finally, it is good to wear comfortable clothing that you can get dirty without any problem.

The first step is to remove mold and residue

The first thing to do is to remove any residue and mold from the screens. To do this, mix white vinegar and hot water in equal parts in a spray bottle. Apply it to the screen and let the solution sit for about 15 minutes. White vinegar is a natural cleaner that will help to remove soap residue and mold from the screens.

After 15 minutes, take a soft sponge and start scrubbing the areas where you applied the vinegar solution. If you find stubborn stains, you can use a little baking soda paste and water for a deeper clean. After scrubbing well, clean the screen with some hot water. Then, use the microfiber cloth to dry the surface and prevent water marks on the screen.

Deep cleaning

If you see that the screen is very dirty and needs a deep clean, you will need a specific cleaner for shower screens. These types of products will effectively dissolve soap scum and lime residue. To do this, follow the manufacturer’s instructions for the cleaner and apply it along the entire surface of the screen.

Let the cleaner sit for a few minutes. Once the time has passed, use the soft sponge to scrub the screen. Make sure to scrub along the entire surface. If the stains are tough, you can use the glass scraper carefully to avoid scratching the surface.

Once you have finished scrubbing, rinse the screen with hot water. Finally, use the microfiber cloth to dry the entire surface of the screen.

How to keep your shower in perfect condition

If you want to keep your shower screen in perfect condition, it is good to take note of the following recommendations. First of all, abrasive cleaners or hard scrubbers are prohibited as they can scratch the glass surface. It is advisable to use soft sponges and microfiber cloths.

It is important to clean the joints of the screens well, as mold and dirt often accumulate in these areas. Use a toothbrush that you don’t normally use for this purpose. If your screen has sliding shower doors, you should also clean the rollers and rails. This is important for the doors to function properly and to prevent dirt buildup.

It’s okay to spend a few minutes after each shower cleaning the screens. This is important for saving time and effort in the future. Following these tips and recommendations will allow you to have an impeccable shower screen free of dirt.

Referrer: MiMub in Spanish

Last articles

Scroll to Top
×